What bolt pattern is a 2012 Honda Civic?

Written by RepairDost Editorial Team
Updated on February 20, 2024

Image by Joshua Van Hierden from Pixabay

2012 Honda Civic Bolt Pattern

The 2012 Honda Civic has a bolt pattern of 5×114.3mm, meaning it has five lugs with a diameter of 114.3mm across. The wheel size for the 2012 Honda Civic varies depending on the trim level and specific model, but common sizes include 15, 16, and 17 inches in diameter with a width of 6.5 to 8 inches.

2012 Honda Civic Tire Specs

2012 Honda Civic Tire Specs
Tire Size	Wheel Size	Tire Pressure (Front)	Tire Pressure (Rear)	Bolt Pattern	Thread Size
195/65R15	15 x 6.0 inches	32 psi	32 psi	5 x 114.3 mm	M12 x 1.5
205/55R16	16 x 6.5 inches	32 psi	32 psi	5 x 114.3 mm	M12 x 1.5
215/45R17	17 x 7.0 inches	32 psi	32 psi	5 x 114.3 mm	M12 x 1.5

Scroll left to view more

How to swap wheels on a 2012 Honda Civic

Use a lug wrench to loosen the lug nuts on the wheel you want to remove.
Lift the vehicle with a jack and support it securely with jack stands.
Remove the lug nuts and take the wheel off.
Install the new wheel onto the hub and tighten the lug nuts by hand.
Lower the vehicle and use a torque wrench to tighten the lug nuts to the manufacturer’s recommended torque specification.

How to measure the bolt pattern on a 2012 Honda Civic

Determine the number of lugs by counting the number of bolts on the wheel hub.

Measure the distance between two directly opposite lug holes using a caliper or ruler.

Use a bolt pattern gauge or online bolt pattern guide to determine the bolt pattern of the wheel hub.

What are the factory wheel sizes for 2012 Honda Civic

DX, LX, EX: 15-inch steel wheels with wheel covers
EX-L: 16-inch alloy wheels
Si: 17-inch alloy wheels

Stud Size

The 2012 Honda Civic has a stud size of M12 x 1.5, which means that the diameter of the studs is 12 millimeters and the thread pitch is 1.5 millimeters. This is an important specification to know when replacing or upgrading the wheels on your Honda Civic, as it ensures that the lug nuts and wheels are compatible and can be properly secured to the vehicle’s hub.

Offset size for 2012 Honda Civic

15-inch wheels: +45mm offset
16-inch wheels: +45mm offset
17-inch wheels: +45mm to +50mm offset

Center bore

The center bore for the 2012 Honda Civic is 64.1mm. This means that the diameter of the center hole on the wheel should match the diameter of the hub on the vehicle in order for the wheel to fit properly and be safely secured to the hub. It’s important to choose wheels that have a center bore that matches the center bore of your Honda Civic to ensure proper fitment and safety.

Wheel tightening

The recommended wheel tightening torque for a 2012 Honda Civic is 80 lb-ft (108 Nm). It’s important to use a torque wrench and tighten the lug nuts to the recommended torque specification in a star pattern to ensure that the wheels are properly secured to the hub and to prevent wheel wobbling or vibration. Over-tightening the lug nuts can also damage the wheel studs, so it’s important to follow the manufacturer’s recommended torque specification.

FAQ

What is the bolt pattern for the 2012 Honda Civic?

The bolt pattern for the 2012 Honda Civic is 5 x 114.3 mm. This means there are five lug nuts, and the distance between the centers of any two adjacent lug nuts is 114.3 millimeters.

Can I use wheels with a different bolt pattern on my 2012 Honda Civic?

It is not recommended to use wheels with a different bolt pattern than the one specified for your vehicle. Using wheels with the correct bolt pattern ensures proper fitment and safety.