How to Reset Maintenance Light on Toyota Camry

The procedure for resetting the maintenance light on a Toyota Camry may vary depending on the model year. However, here is a general procedure that should work for most Camry models:

1. Insert the key into the ignition and turn it to the “ON” position without starting the engine.
2. Locate the odometer button and press and hold it down.
3. While holding down the odometer button, turn the key to the “OFF” position.
4. Continue to hold down the odometer button while turning the key back to the “ON” position.
5. After a few seconds, the maintenance light should start flashing. Once it stops flashing, release the odometer button.
6. Turn the key to the “OFF” position, then start the engine to confirm that the maintenance light has been reset.

If this procedure does not work for your specific Camry model, refer to the owner’s manual or contact a Toyota dealer for assistance.